How to Install a Trampoline on a Slope or Uneven Ground (10 Ways Discussed)

The ideal place to set up a trampoline is the smooth and level lawn. But, not all grounds are even and smooth equally, there might be dips and curves. So, how to install a trampoline on a slope or on uneven ground?

There are several ways to put up the trampoline on an unleveled place, hill, or sloped land, such as digging trenches, using trampoline leveling kits, using trampoline leveling blocks, and adding soil on the lower side, etc.

Let’s discuss in detail how to level a trampoline on an uneven yard.

Can You Install a Trampoline on a Slope or on Uneven Ground?

It’s recommended to put up your favorite trampoline in an even place for proper fun and exercise. But, if there is no plain area in your yard, what you will do then? Is it possible to set up a trampoline in an uneven or angled yard?

Yes, you can place the trampoline on uneven or sloped locations by making the ground level properly. But it needs some effort to make the ground leveled.

Why is Leveling the Trampoline Important?

If you install the trampoline in a sloped or uneven place, it’s necessary to make level the ground for numerous reasons. Some of them are-

  • Trampoline leveling is important for safety cause. The uneven ground will result in an unleveled jump bed, hence unsafe bounce and might cause injury.
  • The sloped ground drives the jumpers into the lower side which will make an unbalanced landing.
  • Installing a trampoline in an uneven place results in uneven distribution of weight that could wear and damage the springs and mat faster.

How to Level a Trampoline Properly on Uneven or Slope Yard?

how to level a trampoline

The whole process of leveling the trampoline on an angle or on the unleveled ground can be divided into several steps such as-

  • Gathering tools and accessories
  • Determining the slope of the ground
  • Leveling and installing the trampoline

Now I’ll discuss them all in detail

Tools and Accessories Needed to Level a trampoline on Uneven Ground

While putting together a trampoline in an unlevel or slope lawn, you need some basic tools like-

  • Shovel
  • Tape measure
  • Carpenter’s level or a laser level
  • Trampoline assembly tools such as a spring puller, hammer, gloves, and more
  • Trampoline leveler or leveling kit

Read Also: Trampoline installation errors

How to Determine the Slope of Your Yard?

Before putting up the trampoline in an uneven area, your first task is to, measure the slope of the land. Depending upon the slope, you have to decide the right way to install the trampoline on the slope.

You can determine the slope of the uneven earth using several basic stuff like a tape measure, carpenter’s level, and a large wood plank (that should be equal to the trampoline diameter).

To measure the garden slope, you might place the trampoline (after assembling all parts together) for a while in that area where you would love to set up the trampoline. Then, put the plank on the trampoline bed.

Now, set the carpenter’s level on the upper side of the wood plank. Then, lift the lower side of the plank until the bubble of the carpenter’s level becomes stable between the two lines.

Measure the distance (y) between the trampoline bed to the top of the plank on the lower side when the carpenters’ level is leveled perfectly. Now, divide the measured height (y) by trampoline diameter or side-to-side distance (x). So, you will get the slope (y divided by x) from that.

If the value is higher than 7 (major slope), it means the land is very much steep and it’s not safe to install the trampoline there. In that case, move the trampoline to any nearest location where the steep is lower than 7 (minor slope).

Alternately, you can use a laser level to measure the slope of the yard within a few seconds.

Sale
BLACK+DECKER Laser Level (BDL220S)
  • SELF-LEVELING LASER LEVEL – A 360-degree rotating wall attachment projects the laser line at any angle.
  • VERSATILE USE – Ideal for hanging pictures, mirrors, and decorative items, installing shelves and curtain rods, and other household applications.
  • 2 BACKLIT BUBBLE VIALS – For enhanced visibility and accuracy.

Read Also: Easy ways to measure a trampoline

After finding a suitable place, you can now go through any of the following suitable ways to install and level your trampoline properly.

How to Install a Trampoline on a Slope or Uneven Ground or Hill

Here, I’ll share different proven methods to level the trampoline on uneven or sloped land. Whether your yard has a major slope, minor slope, or uneven, these methods will work well there.

1. Add Soil on Down Side

Very simple, you can make the trampoline’s downside up by adding soil. Alternately, sand, dirt, mulch, gravel, and even bricks can be used under the trampoline to level the ground. But, packed the soil well to ensure the soil is firm enough to hold the trampoline.

2. Dig Trench

Another traditional way is to dig a trench in the upper side to level it with the lower side. Then secure the trampoline legs on the trench, but be sure the trench height equals the required height.

After digging the trench, set the trampoline there and check trampoline bed is flattened properly. If needed dig the trench quite more for full flattened. The dig trench method is very effective to set up a trampoline on the hill.

The video below will help you understand how to dig a trench to level your trampoline on a slope, uneven surface, or hill.

3. Cut the Legs

Cutting down the trampoline’s legs might be a possible way to level the trampoline in an up and down ground. But, this is not recommended until other methods work. It will be awkward if you need to use the trampoline in the future.

You can cut trampoline legs only if you plan to set the short legs trampoline there permanently. After deciding, cut the trampoline legs using a saw or other cutting tools. Alternately, hire a professional to cut down trampoline legs.

Read Also: How long does a trampoline last?

4. Adjust Trampoline’s Legs

To level the trampoline correctly, you can simply adjust the legs’ height according to your need. You can hire a professional welder to add the required height material with the lower side legs. Alternately, you can put some extra layers under the trampoline’s down-side legs.

Some trampolines are also available with adjustable legs. You can buy these trampolines with adjustable legs for customized legs height.

5. Trampoline Leveling Blocks

Trampoline leveling blocks are an effective and professional way to level the trampoline in an uneven place in the right way. Blocks are designed basically for RVs or cars, but work for trampolines too. They are very affordable, thus, you can try this unique way.

Leveling blocks are stackable hence you increase or decrease the height easily by attaching or removing the blocks. They come with an interlocking system so no chance of sliding or detaching one block from another.

After assembling several blocks to get your required height place them on the lower side of the trampoline for proper leveling. If you look for a way on how to level a trampoline without digging, trampoline leveling blocks will be an ideal option.

Luckily, trampoline leveling blocks amazon are available throughout the year and they are quite affordable too. Here is a recommended 10-pack trampoline leveling block by Camco.

Camco Heavy-Duty Leveling Blocks | Compatible with Single Wheels, Double Wheels, Hydraulic Jacks, Tongue Jacks and More | Yellow | 10-pack (44510)
  • Provides Safe and Easy RV Leveling: Interlocking blocks stack to the desired height for customizable leveling
  • Compatibility: Can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, fifth wheel jacks and tandem axles
  • Heavy-Duty: Made of durable resin; Dimensions: 8 ½-inches x 8 ½-inches x 1 ½-inch. As the blocks are nested together, each block adds 1-inch of additional height.

6. Trampoline Leveling Kit

Another highly recommended way is to use trampoline levelers to flatten the trampoline in a jagged place. These trampoline levelers are made from durable, heavy-gauge steel. By joining them with trampoline legs, you can easily level the trampoline.

Trampoline leveling kits allow to lock them with the trampoline frame for a secure grip. Just screw the nuts or fasten the clamps and level the trampoline without any safety issues. But, each leveler kit has its own weight limit, don’t forget this.

If you need a heavy-duty trampoline leveling kit suggestion, here is Camco EAZ LIFT.

Camco EAZ Lift RV Slide Out Supports | Made of Heavy-Duty Durable Steel | Adjusts from 19-inches to 47-inches | Supports Up to 5,000 lbs Each | Set of 2 (48866)
  • Protects Slide Out Mechanism: Provides support to slide outs when extended
  • Adjustable: Adjusts from 19-inches to 47-inches in height
  • Unique Features: Universal fit top, space-saving handle and tethered pin for easy use and storage

7. Bury the Trampoline

How to level an in-ground trampoline in a sloped area? In-ground trampoline is a great idea to set up trampoline in an uneven area.

In this way, dig the required depth hole and set your trampoline there. This is costly, but very effective for sloped land. If you bury the trampoline, level the surroundings to avoid rolling.

Read Also: Is it okay to put a usual trampoline in the ground?

8. Wooden Leveler

Putting wooden blocks in the lower side legs of the trampoline is a low-cost and easy method to set up a trampoline on uneven or sloped ground. In this case, you can stack wooden blocks vertically to get the required height.

Alternately, grounding the wooden blocks on the earth is also effective. After setting the legs of the trampoline on the wood plank, you might fasten the legs with clamps or other possible ways to get a secured base.

Here is a video that explains DIY leveling the trampoline on uneven ground using wooden levelers.

Read Also: DIY trampoline swing

9. Retaining Wall

Have you wondered, how to install a trampoline on a hill and major slope? Well, an elevated retaining wall might be the best way to secure your trampoline in high steep locations. Build a wall on the lower side of the trampoline to level the trampoline rightly.

You can use wood or rock to make the wall, but the soil is used too. While leveling the trampoline using the retaining wall method, make sure the wall height doesn’t exceed four feet.

10. Leveling Springfree Trampoline

How to level a Springfree trampoline? A Springfree trampoline leveling kit is the recommended method to set up a Springfree trampoline in an uneven or sloped area. But you can use other methods like digging trenches, using leveling blocks, etc.

Sale
Tri-Lynx 00015 Lynx Levelers - 10 Pack , Orange
  • Lynx Recreational Vehicle Leveling Kit, 10/Pack
  • Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
  • To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack

Safety Tips to Put up Trampoline on a Slope or Uneven Place

Enclosure Net

Is it necessary to add a trampoline net in the sloped area? Yes, it’s recommended to install a safety net with a trampoline in an angle or uneven area to prevent the rolling hazard.

It’s also necessary to keep some leveled space surrounding the trampoline to avoid injury for sudden falling from the trampoline.

Clear Space Around the Trampoline

Another safety feature that you should keep in mind is the clear space around the trampoline. While installing the trampoline don’t place it too close to a fence or boundary. Also, clear tree branches and other obstructions from trampoline edges.

And if the yard is too steep be sure, you keep the surrounding flat and clean to avoid rolling hazards and getting yourself injured.

Don’t Forget Trampoline Stakes

Trampoline anchor kits are good to tie down the trampoline on the ground. If you set up a trampoline on an uneven place, don’t forget to use these stakes to make the trampoline stable.

Frequently Asked Questions

1. What is the best way to level a trampoline in a major slope, minor slope, and uneven place?

Ans: For minor slopes and uneven places, any of the above-mentioned ways will work. But trampoline leveling blocks and trampoline levelers seem more professional methods. If the ground has a major slope (more than 7), then you might make a wall on the lower side to hold the trampoline correctly in place.

2. How level does a trampoline need to be?

Ans: Trampoline needs to be leveled as much as you can, at least it should be looked leveled. You can use the carpenter’s level to make sure the trampoline is leveled well.

After installing the trampoline, place the carpenter’s level in different positions of the trampoline mat and be sure the bubble is in the middle.

3. Is it good to install the trampoline in the sloped yard?

Ans: It’s not very bad to set the trampoline on a slope or uneven place, especially if you don’t have level ground. But, you can make the trampoline flat using leveling kit or leveling the ground or trampoline leveler. However, if there is a flat surface in your yard, don’t install the trampoline on the sloped land.

4. How much does it cost to secure a trampoline on uneven earth?

Ans: You have to spend $20 to $200 extra penny to set up the trampoline on uneven or sloped land compared to plain ground.

5. How long does it require to prepare the slope or unleveled ground to install the trampoline there?

Ans: As installing a trampoline on uneven ground needs some extra tasks to make the unleveled ground into the plain, it requires some extra time. The exact time depends on the steep and how you are doing it.

6. How to level a trampoline on grass?

Ans: Mow the lawn first. Then determine the slope to understand how much leveling is needed. After that, you can dig the upper side or use leveling block or kit on the lower side to level the trampoline fully.

7. How to level a trampoline on concrete?

Ans: Although it’s not recommended to install your trampoline on concrete, still you might do it for some reasons. In case of leveling the trampoline on concrete, you can use leveling blocks. Also, put a soft layer like artificial grass on leveling blocks to reduce friction.

Final Thoughts

If you don’t level the trampoline in the unpaved area, it might cause severe damage to the trampoline or could be a reason for serious injuries. So, don’t overlook it while setting up a trampoline on an uneven or sloped area.

After reading this article, you might now understand how to install a trampoline on a slope, uneven, or hill. I’ve discussed here different best ways how to level a trampoline in the right way, so check which method is most suitable for you and apply this.

Now, bounce safely on your trampoline!

Leave a Comment